Assembling Dedicated PD Computer

howto build a PD-Computer...

FrontPage by zadmin — last modified 2008-02-20 01:08 AM

This Wiki should be used to put in your experience and help to develop ideas "howto build a PD-Computer". Please feel free to contribute comment and rewrite things in here.

lot of disk space and high disk throughput by zadmin — last modified 2006-12-20 12:40 PM

Usecase:

robust for use on stages by zadmin — last modified 2006-12-20 12:40 PM

what does this mean ?

Linux Multi Head Performance Computer by zadmin — last modified 2006-12-20 12:40 PM

The computer should have the possibility to run Linux, since of the features for multihead on GEM. So here I start with a Linux-Style self assembled computer. (Maybe someone can write some Mac-...

Embedded Linux Sound Server by zadmin — last modified 2006-12-20 12:40 PM

Use Cases:

Images by Not dedicated — last modified 2005-04-29 10:01 PM

 

dual/quadro projection on large screens by zadmin — last modified 2007-01-03 12:25 PM

Since we need frame sync between cards on a dual head card, where each output ist buffered once we need 4 renderbuffer on one card. Since big screens cab ve made with many projectors, or we need ...

high rendering power by zadmin — last modified 2006-12-20 12:40 PM

I am nt sure about this point, what is high rendering power, please correct.

Embedded Linux Audio/Video Computer by zadmin — last modified 2006-12-20 12:40 PM

Please note here some Links or Info if you know something...

deleted wiki pages by Not dedicated — last modified 2007-05-06 09:32 PM

 

Macintosh Multi Head by zadmin — last modified 2006-12-20 12:40 PM

Macintosh: - Model G5 dual processor for High Definition content

high dsp power by zadmin — last modified 2006-12-20 12:40 PM

- since there should be enough overhead also to patch during performance and having low latency

KarmaPod by zadmin — last modified 2006-12-20 12:40 PM

This page was made because of a discussion on pd-list. Until I get time to make a better write-up and take some nice digital pictures of the completed system, I have re-posted some preliminary info ...